IVR / Auto-Attendant says 'no valid input'

I've set up the IVR / Auto-Attendant but when I try it I get the error 'no valid input' after a while, why?

This means that you may have pressed one of the numbers on your phone to select an option but the Hosted IPPBX did not recognise it or you didn't press a selection, of course.

a) If you didn't press a selection, you can do so from the moment that you hear the message played to you, so you don't have to wait until the end of the message.
When you do so it should take you straight to the action that is set for that selection.

b) You have pressed a selection (number) on your phone but the phone is not sending it, or at least, not in a format the Hosted IPPBX recognises.
This is something we regularly see with VoIP phones and you can often solve this by adjusting the 'DTMF Type settings of your phone.
The most traditional setting for that, which should always work, is RFC2833 but you can adjust to see what which you prefer and does work.

Last updated: 01/01/2024

 

 


© Voyced
All information provided is copyrighted and purely informative in nature. It is maintained by Voyced with the greatest of care using reliable sources only.
Given the fast evolution of the telecom sector, Voyced does not offer any guarantee about the accuracy and completeness of the information offered. 
We explicitly do not give anyone permission to use this information in any other way than to inform themselves about what (legal) requirements there may be and they need to comply with when registering Services and/or DIDs with Voyced.

  • 2 Los Usuarios han Encontrado Esto Útil
¿Fue útil la respuesta?

Artículos Relacionados

1. First check if your Internet connection is functioning as it should

If your Internet connection is not functioning as it should, your devices won't be able to...

2. Check the Announcements page for possible maintenance work or disruptions

Although we try very hard to prevent any disturbances in the service, we do have to do some...

3. Have the problems started after updating firmware or replacing / adding devices?

Have the problems manifested themselves after changing or adding on of the following: - a new...

4. Check if your phone is set to DND (Do Not Disturb)

You can dial out, but they can't call you? Do incoming calls go straight to voicemail?...

5. Check if your phone is set to Forwarding

Another possibility is that, often by accident, a Forwarding modus has been activated. Often you...